PRODUCTS

NEW ZEALAND PRODUCTS

Architectural Products

Dulux ^®Armourspray EP ^®
(Previously Dulux Antigraffiti)

Armourspray Environmental Protection has been formulated to perform in environments where most other powders would find the going too tough.

Petrol Pumps, Geothermal Power Stations, Bus Stops, Street Furniture, Outdoor signage, Garage Doors, Operating Theatres, Abattoirs, Dairy Factories, Trains, Security Lockers, Telephone Boxes, Post Boxes, Lamp Posts.

Dulux Armourspray EPhas also been formulated to resist most forms of graffiti. The film properties that allow graffiti to easily remove also imparts high levels of scratching, abrasion, and UV resistance. The additional investment in this coating is easily off set by the reduced maintenance costs and longer life of surfaces prone to the graffiti artist.

Dulux Armourspray EPas an Antigraffiti coating is recommended for used on public transport, street furniture, signs and playground equipment where graffiti is most prominent. Dulux Armourspray EPhas been used on projects including the Great South Pacific Express and Telecom New Zealand phone boxes. Armourspay EPas an environmental protection coating is recommended where normal powder coatings would find the going too tough.

As projects for Dulux Armourspray EPare colour specific, it is a primarily a made to order product, however, White and Clear are available in stock in most locations.

Armourspray EP is a trademark of Dulux Powder & Industrial Coatings NZ.

Industrial Products

Pacificgold ^®Armourspray ^®AP

Pacificgold Armourspray APis a highly detergent resistant epoxy-based powder coating designed for use on substrates typically exposed to constant contact with chemicals. Pacificgold Armourspray APis resistant to temperature changes and cleaning chemicals experienced in many appliances.

Pacificgold Armourspray APis ideal for applications such as white good appliances. Other examples of use for this powder range includes hospital equipment bedding, toys and catering equipment.

Indeed any items that demand good chemical resistance with an attractive finish for indoor use should consider Pacificgold Armourspray AP.

Various grades of Pacificgold Armourspray APmeet the Food and Drug Administration (FDA) guidelines for contact with food and drugs. This product is made to order and can therefore be tailored made to customer demands for colour and finish.

Armourspray is a registered trademark of Dulux Powder & Industrial Coatings NZ.

Pacificgold ^®Armourspray ^®VC

Pacificgold Armourspray VCis a fusion bonded epoxy powder coating designed for use on steel substrates typically exposed to constant contact with moisture and or harsh chemicals.

Pacificgold Armourspray VCis resistant to extreme temperature changes and the varied effects of weather and other influences of the environment. The fusion bonded epoxy system is ideal for applications such as water meters, hydrants and fittings, pipes & valves.

When applied by registered applicators, Pacificgold Armourspray VCpowder coating ensures a sealed surface without porous areas which inhibits corrosion and the formation of corrosion products. By specifying Pacificgold Armourspray VC, the working life of the chosen steel casting is improved.

Pacificgold Armourspray VCis suitable for use in contact with potable water and is independently approved to AS/NZS 4020:1999.

Armourspray is a registered trademark of Dulux Powder & Industrial Coatings NZ.

Pacificgold ^®Copol ^™

Pacificgold Copolis a range of polyester epoxy powder coatings and is recommended for use in applications where resistance to general chemicals and reasonable hardness are required.

Pacificgold Copolpowders are used extensively in shelving for supermarkets and industry, for tap-ware, automotive sub components and appliances.

The combination of polyester and epoxy resins gives rise to descriptions as "hybrid" and modified epoxy. Hybrid powders are the most common powder coatings used in the world given their all round use in metal finishing. The epoxy resin gives the chemical resistance and physical hardness whilst the polyester resin provides some ultra violet resistance important for items exposed to the sun through windows.

The Pacificgold Copolrange includes some of the popular standard colours but otherwise can be made to order in a wide variety of colour and finishes.

Copol is a trademark of Dulux Powder & Industrial Coatings NZ.

Pacificgold ^®Crystal ^™Clear

Pacificgold Crystal Clearis a high gloss, water white clear powder coating ideal for finishing of metal parts, be they solid, metallic - over powder coatings or baked paint systems.

Pacificgold Crystal Clearis a low cure system which means it can be applied to a host of metals including brass which tends to tarnish if uncoated, and tarnish if baked on traditional powder coat settings.

Pacificgold Crystal Clearis used extensively for finishing on metallic coatings such as aluminium extrusion, panel work, alloy wheels, bicycle frames, automotive components and so on.

Pacificgold Crystal Clearhas very good ultra violet light resistance so it is suitable for use on furniture and frames exposed to continuous sunlight. Pacificgold Crystal Clearis equally suitable for high traffic locations such as hand rails and balustrades that are subject to handling and scuffing.

Crystal is a trademark of Dulux Powder & Industrial Coatings NZ.

Pacificgold ^®Dupol ^™

Pacificgold Dupolis a polyester grade powder coat suited to outdoor exposure on a variety of substrates.

Pacificgold Dupolis especially suited to situations where a high gloss finish is desired, and/or where a high distinction of image (DOI)is desired.

Pacificgold DupolPolyester has a multitude of possible uses over varied substrates from steel to aluminium. Examples of the application of this chemistry includes bicycles, garden tools, lawn mowers, industrial transformers and heavy equipment, architectural finishes and automotive components.

Dupol is a trademark of Dulux Powder & Industrial Coatings NZ.

Pacificgold ^®Dupol ^™FPG

Pacificgold Dupol FPGis a polyester casting grade powder coat suited to application to porous substrates such as galvanised steel and castings.

Pacificgold Dupol FPGhas been developed specifically to assist in the degassing stage associated with galvanised surfaces. If the galvanised surface is not properly prepared, the surface will release gases during the stoving process which can cause "bubbles" in the top coat of a conventional powder coating.

Pacificgold Dupol FPGhas been developed to not only allow the out gassing to occur, but also allow any bubbles which are formed in the molten coating to break and heal prior to the gel point.

Pacificgold Dupol FPGis equally appropriate for use on galvanised steel to minimise the problem of bubbling. In most cases, the use of Pacificgold Dupol FPG allows the degassing stage to be eliminated.

Pacificgold Dupol FPGis available in New Zealand as a made to order, or there is a range of colours held in stock in Australia which can be made available in New Zealand.

Dupol is a trademark of Dulux Powder & Industrial Coatings NZ.

Dulux ^®Duralloy ^®Generation 2

Dulux Duralloy Generation 2 is a UV resistant powder coating that offers a 10 year colourand 10 year film integrity warrantywhen applied by an Dulux Powder & Industrial Coatings NZ Registered Aluminium Applicator on extruded architectural grade aluminium. Duralloy is designed primarily for use on extruded aluminium, including window and door joinery and extruded aluminium panel work on residential and light commercial buildings. Duralloy® may however, be used for a variety of purposes over varied substrates, from steel to aluminium.

Duralloy Generation 2 is a new high durability performance powder coating that has very good scratch resistance properties and a 30% improvement in UV resistance over standard powder coatings. Dulux Duralloy Generation 2 has an improved appearance, tougher formulation and is available as stock in over 80 fashionable solid and pearlescent colours.

Made To Order facility is also available for Duralloy.

Duralloy is a registered trademark of Dulux Powder & Industrial Coatings NZ.

Dulux ^®Duratec ^®

Duratecis a "one coat system" that delivers a hard wearing and highly durable surface coating and offers a 15 year warranty on film integrity & a 15 year warranty on colour when applied by an Dulux Powder & Industrial Coatings NZ registered Applicator on pretreated aluminium.

Duratecis recommended for use on premium residential and commercial developments. Duratec's chemistry ensures very good scratch and mar resistance in busy traffic areas within business offices, hospitals and shopping districts and has excellent external properties to withstand the harsh New Zealand climate including salt spray.

Duratecexceeds the strict international standard of AAMA 2604-98 which requires a minimum 5 year exposure performance in the intense Florida climate.

Duratecis now available as stock in 16 colours selected from the most popular architectural grade powder coating colours in New Zealand, a range of 8 solid and 8 pearlescent colours, see the brochure for details.

Made to Order facility is also available for Duratecfor colour specific projects and are available in a matt, satin or gloss finish.

Duratec is a registered trademark of Dulux Powder & Industrial Coatings NZ.

Dulux ^®Duratec ^®LX

Duratec LXis the latest in a new generation of superior performance powder coatings designed for architectural aluminium products where extreme corrosion resistance is required.

Duratec LXhas been formulated using a combination of superior grade resins and pigments to provide an excellent powder coated surface that is hard wearing and durable and is suitable for internal and external use.

With the added protection of additives that inhibit corrosion and ultra violet damage, Duratec LXalso provides an excellent protection from the harsh New Zealand climate including salt spray.

This "one coat system" offers a 15 year film integrity and 10 year colour performance warranty when applied by an Dulux Powder & Industrial Coatings NZ Registered Applicator. Duratec LXexceeds the strict international standard of AAMA2604-98, which requires a minimum 5 year exposure performance in the intense Florida climate.

Dulux offers a made to order facility for Duratec LXwhich is available in a satin finish.

Duratec is a registered trademark of Dulux Powder & Industrial Coatings NZ.

Pacificgold ^®Durepoxy ^™

Pacificgold Durepoxypowder coatings are formulated to provide high surface hardness and very good chemical resistance and excellent mechanical properties.

Durepoxyoffers improved chemical resistance over Pacificgold Copol, but if very harsh chemical contact is expected then Dulux Armourspray VC may be the preferred powder coating.

Durepoxypowders are used in many automotive applications such as engine blocks, brake & suspension components and tap-ware.

Durepoxyis recommended for use as protective and decorative coatings for internal applications but is not recommended for external applications as chalking will develop on the film quickly after exposure.

The Durepoxyrange can be made to order in a wide variety of colour and finishes to suit the end application.

Durepoxy is a trademark of Dulux Powder & Industrial Coatings NZ.

Dulux ^®Fluoroset ^®FP

Fluoroset FPhas been formulated specifically for prestigious architectural applications where superior colour stability, gloss retention, mar resistance and general serviceability is demanded.

Fluoroset FPexceeds the performance of high and super performance polyester powder coatings as it is formulated using 100% fluoropolymer resin. As no other resins are incorporated, Fluoroset FP maintains an intrinsic hardness which makes it extremely suitable for use in high traffic zones irrespective of exposure to sunlight.

Fluoroset FPalso exceeds the strict international standard AAMA2605-98.

When applied by an Dulux Powder & Industrial Coatings NZ Registered Applicator on pretreated aluminium, Dulux Powder & Industrial Coatings NZ offers a 20 year warranty on film integrity and a 20 year warranty for colour.

Fluoroset FPis available on a made to order basis and obtainable in an attractive satin finish.

Fluoroset is a registered trademark of Dulux Powder & Industrial Coatings NZ.

Dulux ^®Microtec ^®HT

Pacificgold Microtec HTis a thin film polyester epoxy powder coating suitable for use on flat sheet metal.

Standard powder coatings need to be applied between 50 to 80 microns in order to deliver suitable colour coverage, a smooth film and remove the presence of nibs or inclusions.

Microtec HTis capable of film builds down to 30 microns when applied through suitably designed spray and recovery equipment to flat sheet metal. The Polyester epoxy system provides the hard wearing, robust surface along with general chemical resistance properties. The cost of specialised spray equipment essential to delivering the thin film effect can generally be recovered from the reduced coating costs involving powder purchase and waste.

Microtec HTis being used on a variety of flat sheet products including supermarket shelving and office furniture such as filing cabinets and shelves. Indeed with the correct equipment and skills in place, Dulux Microtec HTcan be applied to fabricated and odd shape metals such as pallet racking.

Dulux Powder & Industrial Coatings NZ offer a limited range of Microtec HTcolours however reasonable made to order conditions apply allowing the choice for customers to select their own colour and finish.

Microtec is a registered trademark of Dulux Powder & Industrial Coatings NZ.

Pacificgold ^®PG288 ^™

Pacificgold PG288may be used on a multitude of metal substrates: from window frames to shelving, office furniture to pool fences, whitegoods to garden tools, outdoor furniture to automotive components.

PG288is hardy and durable. The matt and satin finishes are ideal for use on metal areas exposed to abrasion from handling, stacking or people traffic. PG288is often used for shop front frames, commercial furniture and shelving.

Available as stock and made to order, the PG288range offers a wide ex-stock powder coating colour range.

PG288 is a trademark of Dulux Powder & Industrial Coatings NZ.

OTHER PRODUCTS

Dulux develop, manufacture and supply a host of other powder coatings including:

Dulux ^®Alphatec ^®Plus

Dulux Alphatechas been specially formulated to withstand the harsh Australian climate, and is renowned for its versatility and durability. Dulux Alphatecmay be used on a multitude of metal substrates: from window frames to shelving, office furniture to pool fences, whitegoods to garden tools, outdoor furniture to automotive components.

The Dulux Alphatecrange includes Alphatec Plusand Alphatec MX2.

Alphatec Plusis hardy and durable. The matt and satin finishes are ideal for use on metal areas exposed to abrasion from handling, stacking or people traffic. Alphatec Plusis often used for shop front frames, commercial furniture and shelving.

Alphatec Plusis available in a wide range of colours and effects from Australia and can be supplied in New Zealand on request.

Alphatec is a registered trademark of Dulux Powder & Industrial Coatings Australia.

Dulux ^®Duralloy ^®Australian

Dulux Duralloy 272 line is a UV resistant powder coating that offers a 7 year colourand 10 year film integrity warrantywhen applied by an Dulux Powder & Industrial Coatings NZ Registered Aluminium Applicator on extruded architectural grade aluminium.

Duralloy line 272 is a new high durability performance powder coating that has very good scratch resistance properties and a 30% improvement in UV resistance over standard powder coatings. With an improved appearance, tougher formulation, Duralloy lends itself well to aluminium window frames and doors.

Duralloy is available in a wide range of colours and effects from Australia and can be supplied in New Zealand on request.

Whilst the warranty is limited to aluminium prepared by Dulux Powder & Industrial Coatings NZ. Registered Applicators, Duralloy may be applied on a variety of other substrates (eg metal, glass); basically, most substrates that can withstand a heating temperature of 200°C may be coated with Duralloy.

Duralloy is a registered trademark of Dulux Powder & Industrial Coatings Australia Pty Ltd.

Powder Primers

Dulux Powder & Industrial Coatings NZ. offer a range of stock powder coating primers for the purpose of improving product finishing for aesthetic and / or functional purposes. Dulux can also design a primer for a particular end application where desired.

The range of stock primers include:

• SU Primer (Sealer Undercoat)- is designed for very porous substrates such as galvanised metals or sand castings. This primer is used commonly on galvanised fences and fittings before a top coat is applied, to provide optimal film appearance and improved moisture resistance from sea spray.
• UC Primer (Undercoat)- is designed for general metal castings that need some assistance with pin hole resistance, as in the case of alloy wheel castings or balustrade fittings.
• The UC primeralso assists with preparing perforated or sharp edge metals that need additional film build to reduce risk of under creep corrosion. The advantage of the UC primer is the wider choice of top coats which can be applied, including various wet paints.
• Zincshield Primer- Zincshield is designed to provide additional corrosion inhibition on abrasively blasted steel products. The Zinc component provides sacrificial opportunities to the steel whilst the epoxy resin system provides improved chemical resistance and coating adhesion.

For more information refer to Zincshield.

Zincshield is a trademark of Dulux Powder & Industrial Coatings NZ. For further information, MSDS or TDS please contact us.

Pacificgold ^®Pyrotec ^™FR

Pacificgold Pyrotec FRis a powder coating that is suitable for use in areas where fire protection is important as it reduces the spread of flame, smoke and fume generation in the event of fire.

Pacificgold Pyrotec FRis suitable for interior and exterior applications and has excellent resistance to chipping or scratching.

Pacificgold Pyrotec FRpowders was developed in the United Kingdom in response to demands for coatings suitable for use on naval frigates, underground railways stations and public environments including schools and hospitals.

Pacificgold Pyrotec FRhas approvals from the UK based Warrington Fire Research for compliance to British Standard BS476.

Pacificgold Pyrotec FRis available on a made to order basis and can only be applied by registered applicators.

Pyrotec is a trademark of Dulux Powder & Industrial Coatings NZ.

Pacific Gold ^®Pyrotec ^™HR Series

Dulux Powder & Industrial Coatings NZ. has a range of stock and made to order heat resistant powders called Pyrotec HR(Heat Resistant).

The range includes Pyrotec HR180, Pyrotec HR250, Pyrotec HR350and Pyrotec HR500.

The Pacificgold Pyrotec HRseries are by nature low gloss finishes but can be formulated so that they appear smooth or textured and special effects such as metallic are also available.

Pacificgold Pyrotec HR180, Pacificgold Pyrotec HR250and Pacificgold Pyrotec HR350are heat resistant powder coatings designed for application requiring continuous service temperatures of 180°C, 250°C and up to 350°C respectively, while maintaining physical integrity, gloss and colour.

Pacificgold Pyrotec HR180and Pacificgold Pyrotec HR250and Pacificgold Pyrotec HR350are ideal for barbecues and barbecue fittings, wood stoves, commercial lighting fixtures and automotive components.

Pacificgold Pyrotec HR500is a heat resistant powder coating developed to withstand extreme service temperature of up to 500°C whilst maintaining its physical integrity.

Pacificgold Pyrotec HR500exhibits a hard wearing, serviceable finish and is available in a limited range of decorative colours that is suitable of internal and external use.

Pyrotec is a trademark of Dulux Powder & Industrial Coatings NZ. For further information, MSDS or TDS please contact us.

SPECIAL FX SERIES

Dulux Powder & Industrial Coatings NZ. under the Pacificgold Brand, manufacture a Special FX range of powder coatings. The range is defined by the appearance of the cured film, rather than the chemistry. Names tend to be descriptive - Cob Web and Alligator etc.

Special FX - Alligator ^™

Pacificgold Alligatoris a special effect coating that displays a strong mud cracked effect when applied to a variety of metals. The unique effect is especially suited for feature work in interior design situations such as shop displays, office feature furniture and public exhibition areas.

Pacificgold Alligatoris suitable for use on internal applications only is available on a made to order basis.

Aligator is a trademark of Dulux Powder & Industrial Coatings Australia Pty Ltd.

Special FX - Cob Web ^™

Pacificgold Cob Webare special effect coatings that display an attractive crazed and textured appearance when applied to a variety of metals.

The unique effects are especially suited for feature work in interior design situations such as shop displays, office feature furniture and public exhibition areas.

Pacificgold Cob Webare suitable for use on internal and external locations depending on the chemistry used, however consideration should be given to reduced ability to clean the surface from external grime and dirt, so in general internal applications are preferred.

Pacificgold Cob Webare available on a made to order basis.

Cob Web is a trademark of Dulux Powder & Industrial Coatings NZ.

Special FX - PG288 ^™FX

Pacificgold PG288 FXis a special effect range of powders available in finishes such as ripples, textures and hammer finishes.

Pacificgold PG288 FXcoatings can be applied to a variety of metals including aluminium, galvanising, stainless steel, mild steel and so on.

The Pacificgold PG288 FXrange is suited for various applications including sheetmetal cabinets, furniture, bedding and displays. A particular advantage of the Pacificgold PG288 FX range is the ability to camouflage welded sections and splatter that is costly to remove.

Pacificgold PG288 FXis available in a host of stock products in ripples and textures and hammer finishes.

PG288 is a trademark of Dulux Powder & Industrial Coatings NZ. For further information, MSDS or TDS please contact us.

Special FX - Metallica ^™

Pacificgold Metallicais a highly reflective metallic coating that provides the ultimate metallic effect with the benefits of hard wearing powder coatings.

Pacificgold Metallica Silveris available in stock New Zealand while Metallica Goldis available ex Australia.

When top coated with Pacificgold Crystal Clear, this provides a stunning finish to metal products. The impressive effects are especially suited for feature work in interior design situations such as shop displays, office feature furniture and public exhibition areas.

Pacificgold Metallicahas been used on limited edition appliances, toy frames, reception furniture, chairs and tables.

Pacificgold Metallicais suitable for use on internal locations.

Metallica is a trademark of Dulux Powder & Industrial Coatings NZ.

Special FX - Watersilk ^™

Special FX Water Silkare special effect coatings that display an attractive crazed and textured appearance, when applied to a variety of metals.

The unique effects are especially suited for feature work in interior design situations such as shop displays, office feature furniture and public exhibition areas.

Special FX Water Silkare suitable for use on internal and external locations, however consideration should be given to reduced ability to clean the surface from external grime and dirt, so in general internal applications are preferred.

Special FX Water Silkare available on a made to order basis.

Water Silk is a trademark of Dulux Powder & Industrial Coatings NZ.

HSS Products

Pacificgold Zincshield ^™

Pacificgold Zincshieldis a high zinc containing primer specifically formulated and designed for powder coating applications.

Pacificgold Zincshieldmay be used with confidence on steel substrates as it protects steel from corrosion whilst providing a sound substrate for powder coating.

Pacificgold Zincshieldis excellent for use where corrosion inhibition is required.

Pacificgold Zincshieldis partially cured on the metal surface and then the desired top coat finish is applied. This two coat system is then co-baked to a full cure to ensure maximum polymer interaction and excellent intercoat adhesion.

Alternatively, Pacificgold Zincshieldcan be fully cured to act as a single functional coating where UV stability is not a requirement.

Zincshield is a trademark of Dulux Powder & Industrial Coatings NZ.