ABOUT OUR COLOUR OFFER

Dulux Powder & Industrial Coatings offer a large range of powder Coating chemistries and colours on an ex-stock basis in New Zealand. The four Colour Cards categorise the chemistries broadly into their end use, however, most powders can be used over most metallic substrates.

Dulux Powder & Industrial Coatings also offer a made to order service, which is able to produce an almost infinite colour range and finish type, subject to minimum quantity provisions and "fit for purpose" considerations.

OUR COLOUR RANGE

Duralloy ^®Colour Guide

The Duralloy Colour Guide illustrates 70 Duralloy colours held in stock in New Zealand. The Duralloy product is warrantable when applied to suitably prepared Aluminium extrusion by an Dulux Powder & Industrial Coatings NZ Registered Applicator in compliance with the parameters detailed in the Duralloy Applicators manual.

Duralloyoffers a 10 year colour retentionand 10 year film integrity warrantyon residential developments and small commercial projects in New Zealand. See Architectural specification for guidance on the appropriate use of Duralloy.

Whilst Duralloy was formulated with Aluminium joinery as the targeted substrate, Duralloy is equally at home in industrial applications over a variety of substrates.

An MTOservice increases the range of colours available in this chemistry.

The Duratec ^®Brochure and Colour Card

In addition to providing valuable information regarding the specification and application of Duratec, the Duratec brochure illustrates 16 Colours held in stock in New Zealand by Dulux Powder & Industrial Coatings. The Duratec product is warrantable when applied to suitably prepared Aluminium extrusion by an Dulux Powder & Industrial Coatings NZ Registered Applicator in compliance with the parameters detailed in the Duratec Applicators manual.

Duratec, offers a 15 year colour retentionand 15 year film integrity warrantyfor major residential and commercial developments.

An MTOservice increases the range of colours available in this chemistry.

The Electro™ colour range

Unlike traditional anodic deposition finishes which are restricted to aluminium, architects, designers, and colour consultants will love the flexibility and freedom the Electro™ range palette of colours offers. With relative ease, Electro™ powder coatings can be applied to a wide variety of substrates such as aluminium, steel, and galvanised metal, making perfect colour co-ordination possible across many different construction elements, fixtures, and fittings.

The Electro Range offers a 15 year colour retention and 15 year film integrity warranty for major residential and commercial developments.

An MTOservice increases the range of colours available in this chemistry.

The Pacificgold ^®Industrial Colour Card

72 colours are illustrated on the Pacificgold Industrial colour card, with most of these colours available ex-stock. There are five colours listed as made to order, this for a variety of reasons including chemistry. The colours are all related to a sun fade index that splits the colours into three categories.

A sun fade index of 1 denotes a UV stable colour with very low fade potential.

A sun fade index of 2 denotes a colour that will fade on exterior exposure. The degree of fade varies from colour to colour with generally the brighter colours showing obvious fade with the first 2 years.

A sun fade index of 3 indicates that this coating should not be considered in an exterior environment.

In general, the Pacificgold colour range has been designed for industrial purposes, however, some of the colour range would be equally at home on Aluminium Extrusion, please contact us for more information.

Disclaimer:Due to variations in computer monitor screens and colour printers, the colours represented in the PDF file links below are indicative only. For a closer representation of colour, request an original copy of a colour chart or swatch of a specific colour by accessing the Contact us page.